UniCM-30S Weak Cation Exchange Chromatography Resin
NanoMicro UniCM-30S weak cation exchange chromatography resin is based on a polymer matrix that has been surface-modified with hydrophilic groups and then coupled with ion exchange ligands. It offers excellent biocompatibility and physicochemical stability for biomolecules, significantly improving purification efficiency. It is ideally suited for the purification of small biomolecules such as small proteins, peptides, nucleic acids, and antibiotics.
UniCM-30S features a hydrophilic surface modification that provides low non-specific binding, high resolution for small molecules, and high binding capacity. Key technical parameters are listed below:
Performance Specifications
Swipe Left
| Product Model | UniCM-30S |
| Separation Principle | Weak cation exchange |
| Matrix | Polymethacrylate (PMMA) |
| Particle Size | 36 μm |
| Ligand | -CH2COO-- |
| Ligand Density | ~0.23 meq·mL-1 |
| Dynamic Binding Capacity | ~60 mg·mL-1 (Lysozyme) |
| Maximum Pressure | 1.0 MPa |
| CIP | 0.5 M NaOH |
| Recommended Flow Rate | 50-300 cm/h |
| pH Stability | 2~12 |
| Chemical Stability | Compatible with all commonly used buffers, 1 M acetic acid, 1 M NaOH, 1 M HCl, 70% ethanol, 30% isopropanol, 30% acetonitrile, 1% SDS, 6 M guanidine HCl, 8 M urea, and other common organic solvents; avoid strong oxidizing agents. |
| Operating Temperature | 4~30 ℃ |
| Storage Conditions | 20% ethanol, 4~25℃ |
Ordering Information
Swipe Left
| Product | Package Size | Catalog # |
| UniCM-30S | 30 mL | 04021-030050-2030 |
| 50 mL | 04021-030050-2050 | |
| 100 mL | 04021-030050-2100 | |
| 300 mL | 04021-030050-2300 | |
| 500 mL | 04021-030050-2500 | |
| 1 L | 04021-030050-1001 | |
| 5 L | 04021-030050-1005 | |
| 10 L | 04021-030050-1010 | |
| 50 L | 04021-030050-1050 | |
| 100 L | 04021-030050-1100 |
Note: NanoMicro offers a wide range of preparative pre-packed columns, including 7.7*22mm (NmTRAP 1mL), 16*25mm (NmTRAP 5mL), 7.7*100mm (NmSCREEN 4.7mL), 16*100mm (NmPREP 20mL), 26*100mm (NmPREP 50mL), as well as NmVALID and NmLOAD series preparative columns with adjustable bed heights (inner diameters of 8/11/16/26/50mm), and NmPILOT series pilot-